instructions on installing everbilt tank lever

Again, make sure the new fill valve is the same height as the old valve. If the other components in your toilet’s tank are in good condition, purchase a new fill valve to replace the old one. If your toilet takes too long to fill and the flapper is working correctly, it is likely due to a clogged fill valve. If you flush the toilet and the bowl finishes filling before the tank, your fill valve is operating improperly, wasting water and costing you money.įill valves can also become clogged. Sometimes the culprit in your leaky toilet is merely a faulty fill valve incorrectly regulating the level of water coming in from the supply line. You’ll need to replace the old flapper with an identical one to ensure it will fit the fill tube, otherwise, you’ll need to replace the fill tube as well. Just make sure the new fill valve is the same height as the old one. If your refill tube is functioning correctly, buy a fill valve and flapper kit to tackle the problem.

The fill valve, located on the left side of the tank, regulates the water coming in from the supply line, shutting off the water when the tank and bowl have reached their fill lines. The flapper is the rubber plug that drops against the drain hole in the bottom of the tank. Replacing the flapper and the fill valve is often all that’s needed to fix a leak. Replacing the refill tube, for example, requires removing the entire tank-maybe not on the top of your to-do list. While there are good reasons to purchase a universal kit and replace all the components in the tank, you may not have the time, money, or inclination to do that right now. Given that these kits include a full set of replacement parts, purchase one if you plan on completing a toilet overhaul.

Just be sure to check the size of your flush valve-the drain opening located at the bottom of the tank- to confirm that 2 inches is the right size. Universal kits will fit toilets with 2-inch flush valves, which cover the majority of both newer low-flow models and older commodes. This can ultimately save you time, money, and the added inconvenience of a toilet that repeatedly goes out of service.

After all, a toilet’s replaceable parts will only last 4 to 5 years, so it may make sense to replace everything at once rather than wait for each part to fail. Even if you only notice one issue with your toilet, if multiple parts appear dirty and corroded, you’re wise to replace all parts and hardware. UniversalĪ universal kit gives you everything you need to repair a leaky or malfunctioning standard toilet, including the fill valve, flapper, refill tube, and all the hardware that goes with it. Here’s what you can expect to find in the most common toilet repair kits. Some include only the specific parts required to complete a particular type of toilet repair, while others provide every part you need for a complete upgrade. There’s a wide variety of toilet repair kits.

Instructions on installing everbilt tank lever